Oki ES9466 MFP Management Manual page 11

1.The High Security Mode
When IPP printing is performed, use the port created by entering "https://[IP address]:[SSL port number]/
Print" into the URL field.
(e.g.: https://192.168.1.2:443/Print)
* For details, refer to [IPP printing] under [Installing Printer Drivers for Windows] - [Other Installations] in the Software Installation Guide.
When importing the data such as address book, be sure to use the data exported from this equipment.
Do not use any applications which need a setting change of the [ODCA] sub menu in the [Setup] menu on the
[Administration] tab under TopAccess.
Do not enable [Use Password Authentication for Print Job] when printing is performed from this equipment
with any of these printer drivers; PCL Printer, PS Printer and XPS Printer.
To operate this equipment securely, be sure to set the following items:
Perform the setting correctly referring to Initial value list ( P.19).
 Use the encrypted PDF format when saving or sending a file and the encryption level shall be 128 bit AES.
 Specify a reliable remote PC for the saving destination of the scan data.
 Do not use PUBLIC BOX in e-Filing since no password can be set.
 Do not use MFP LOCAL since no password can be set.
 Administrators must regularly export and store the logs.
An administrator should explain to users that the high security mode is operating in this equipment as well as
the following items so that they will keep to them appropriately.
 Printing should be performed by using the printer driver settings of IPP print.
 Specify a reliable remote PC for the saving destination of the scan data.
 Do not use a shared folder in e-Filing.
 Do not use any local folder of this equipment.
When disposing of an MFP, be sure to contact your service technicians to erase the data in the HDD completely.
Precautions on Using the High Security Mode 11