SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Management Manual page 240

C L
OMMAND INE
Command Usage
This command provides information on the community access
strings, counter information for SNMP input and output
protocol data units, and whether or not SNMP logging has been
enabled with the snmp-server enable traps command.
Example
Console#show snmp
SNMP traps:
Authentication: enable
Link-up-down: enable
SNMP communities:
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors
0 No such name errors
0 Bad values errors
0 General errors
0 Response PDUs
0 Trap PDUs
SNMP logging: disabled
SNMP ip filter group:
1. IP:10.1.2.3 Mask:255.255.255.255 valid
2. IP:10.1.3.0 Mask:255.255.255.0 valid
Console#
3-72
I
NTERFACE