Table of Contents
Advertisement
Using Basic Phone Functions
Placing or Answering a Call
Placing or Answering a Call
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
Adjusting the Ringer Volume
To adjust the ringer volume, press + on the Volume button to increase the volume,
or press - to decrease the volume when the handset is on-hook and the speaker is
off. Retain the setting by pressing OK
is saved.
Muting a Call
To mute the phone microphone, speaker, or headset microphone, press the Mute
button on the phone. The button glows red. Press the Mute button again to unmute.
There are several ways to place or answer a call:
•
Pick up the handset.
•
Press the Speaker button.
•
Press the Headset button.
•
Press a configured line button (to place a call) or a green flashing line button
(to answer a call). (Not applicable to the Cisco SPA502G or
Cisco SPA512G).
You might have to dial a number or series of numbers to reach an outside line. Ask
your phone administrator for specific information.
To place a call without dialing a number:
•
Press Redial to dial the last number.
•
If you have configured speed dials, press the assigned speed dial code and
then press AbbrDial.
•
To answer a call that is ringing on another phone in the phone system, press
Pickup. Then enter the extension number of the ringing phone.
•
Choose a number from a directory. See
page
32.
•
Choose a number from the Call History. See
page
33.
(except on the Cisco SPA501G)
Using the Local Directory,
Using the Call History Lists,
3
and the setting
26
Advertisement
Table of Contents
