Operation; Cleaning, Care And Maintenance - Polar Electro G608 Instruction Manual

Operation

Storing Food
To get the best results from your POLAR appliance, follow these instructions:
• Only store foodstuffs in the appliance when it has reached the correct operating temperature.
• Ensure gastronorm bays are full at all times, even if the gastronorms are unused or empty. Empty bays will greatly reduce efficiency of the appliance.
• Use the sapcer bars provided to fill any gaps (they are not required to support each GN pans)
• Do not obstruct the fans inside the appliance.
Turn On
Ensure the power switch is set to [O] and turn on at the socket.
1.
Switch on the Power [I]. The current temperature within the appliance is displayed.
2.
Control Panel
Set the Operating Temperature
Press the button. The display will flash.
1.
Press the or buttons to display the required temperature.
2.
Press the button to store the temperature.
3.
Manual Defrost
Press and hold the button aux for 2 seconds to begin a manual defrost. The defrost light illuminates.
Cleaning, Care & Maintenance
• Switch off and disconnect from the power supply before cleaning.
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Clean the door seal with water only.
• Always wipe dry after cleaning.
• Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
• Take care when cleaning the rear of the appliance. Sharp edges can cut.
• A POLAR agent or qualified technician must carry out repairs if required.
Cleaning the Condenser
Periodically cleaning the condenser can extend the life of the appliance.
POLAR recommend that a POLAR agent or qualified technician clean the condenser.
3