Installing Additional Memory; Preparing What Are Needed; Changing The Memory - Fujitsu LifeBook P Series Manual

INSTALLING ADDITIONAL
MEMORY
Here are the initial and maximum
memory capacity of your notebook.
Initial memory
capacity
256MB

Preparing what are needed

• Memory (expansion RAM module)
• Phillips screwdriver
Use a screwdriver of appropiate size to
loosen the cover. Failure to do so may
damage the head of the screws.

Changing the memory

Remember to turn off the power of the
notebook and disconnect the AC
adapter before you attempt to install or
remove the memory module.
Keep small objects, such as covers and
screws out of the reach of babies and
children. These small objects may
suffocate a baby or child if they are
swallowed accidentally. Should such an
accident happen, consult a doctor
immediately.
16
Available memory
capacity
1024MB
Cer tain components around the
memory slots becomes very hot when
the notebook is turned on for a long
period of time.
To avoid possible burns, do not install
or remove memory immediately after
turning off the notebook but wait for its
internal components to cool down.
To install or remove a memory module,
hold it by the edge and be careful not to
touch any component and IC.
Memory is composed of materials
sensitive to human body static charges.
Before handling any memory module,
always touch an appropiate metal object
to discharge the static charges from your
body.
Please remember to turn off the
notebook before you begin to install or
remove the memory module. If the
notebook is placed in standby or
hibernate mode while the memory
module is removed, data may be lost or
damaged. This may also damage the
memory module.