Logging On To Wap Site - NEC N820 Manual

Web font
You can select the font to be displayed on your phone's screen from Large, Normal and Small.
The size of Chinese characters is fixed.
With the standby screen displayed, press
Press the appropriate key for the required font.
Clear memory
If you start a WAP session using the last page visited, the information will be restored from the phone memory. If, however this page has been updated since your last
visit, the updated page will not be displayed. To avoid this possibility clear the memory by the following procedure:
With the standby screen displayed, press
Reset settings
With the standby screen displayed, press

Logging on to WAP site

There are three types of WAP connection:
•
Connect to a specific URL
•
Connect to the homepage of the default connection
•
Connect to the last web page connected before
Connect to a specific URL
To connect to a URL specified by yourself, use the following procedure.
With the standby screen displayed, press
Connect to the Home page of the default connection
With the standby screen displayed, press
Connect to the last web page visited
With the standby screen displayed, press
When you access the Internet with your phone for the first time or after you cleared the memory, the homepage set for Web/MMS profile will be the page to be
accessed.
66
4, 5 and 3 to display the Web font screen.
4, 5 and 4. Then, press Softkey 1 to clear the memory.
4, 5 and 5. Then, press Softkey 1 to reset all WAP settings to their original states.
4, 1 and 1. Key in the desired URL, and then press
4, 1 and 2 to access the homepage set for the currently selected profile.
4, 1 and 3 to display the last web page you had visited.
twice.