Table of Contents
Advertisement
To reset the display to zero, you may be prompted to enter the PIN2 code.
Maximum charge
With the Call options screen displayed, press 6 and 2.
Key in the maximum number of units allowed and press Softkey 1.
To set the maximum charge, you may be prompted to enter the PIN2 code.
Unit price
With the Call options screen displayed, press 6 and 3.
Use the
keys to highlight the whole number (integer), the decimal number or the currency field.
and
Key in the required value for the whole number and decimal number fields. For the currency field, key in the currency type using a maximum of three characters.
Press Softkey 1.
To set the unit price, you may be prompted to enter the PIN2 code.
Redial blacklist
If dialled call is not successfully connected (e.g. number busy), the auto redial facility will be offered (see page 13). If you have set auto redial and the call still fails, the
number called will be added to the blacklist.
With the Call options screen displayed, press 7 to access the numbers in the blacklist.
Call settings
From the Calls screen, you can change various call settings: the call diversion, call waiting and holding, auto redial and line identification.
With the standby screen displayed, press
Call diversion
Setting Call diversion
With the Calls screen displayed, press 1. There will be a delay while your phone checks its divert status with your network.
Use the
and
keys to highlight the type of call you wish to divert.
Use the
and
keys to highlight one of the conditions.
When the phone number field of a divert condition is highlighted, either enter the phone number to divert to, or delete any existing phone number.
If you have made any mistake, use the
press
.
1 and 6 to display the Calls screen before performing the following procedures.
and
keys to highlight the appropriate field, and then press Softkey 1 to clear any mistakes. If the settings are correct,
11
Advertisement
Table of Contents
