BACK – Advanced Settings - DMZ
Administrator Idle Time-Out: Allows you to set the specified time of inactivity which will command
the router to automatically log out the administrator.
Figure 1.0
Remote Management
Advanced Settings -
NEXT – Troubleshooting - Main Page
Miscellaneous
Remote management allows you to log into your
router from a remote location. By default, it is set to
0.0.0.0 which would allow any computer on the
WAN side to log into the router
If specified to 24.45.34.12 for example, only a
machine with that specific public IP will be able to
remotely administer the router
To remotely administrate the router: 1) Open a web
browser and 2) Type http://WAN_IP:8080 in the
address bar