SMC Networks Barricade SMC2404WBR User Manual page 124

OUT TCP 100
IN TCP 101
IRC Fserve
OUT TCP 110
IN TCP 111
IRC IDENT
IN UDP 113
IRC Send
OUT TCP 120
IN TCP 121
IRC Get
OUT TCP 130
IN TCP 131
You need to open the appropriate ports in the router's firewall and you will be
able to operate IRC as you usually do. You can put this information in
Virtual Server and/or Special Applications. Try setting the above ports (i.e. -
113, 6667, 7000, 120, 130, etc) as Triggers and then set the incoming ports to
6667,7000,100-131. Also, go into Virtual Server and put in 113, 6667, 7000,
etc. as Service Ports along with your IP Address (the public ports equal the
private ports). Lastly, if you still have problems, try setting the public ports in
Special Applications to 1-64535 (note: this opens a WIDE range of ports).
Q. How do I configure the router to work with MSN Messenger?
A. Here is all the info we have on MSN Messenger:
MSN Messenger
NOTE: Shut off any personal firewall programs such as BlackIce,
ZoneAlarm, etc.
Ports 6891-6900 enable File send,
Port 6901 is for voice communications
Allows Voice, PC to Phone, Messages, and Full File transfer capabilities.
IN TCP 6891 - 6900
IN TCP 1863
IN UDP 1863
IN UDP 5190
IN UDP 6901
IN TCP 6901
Try setting 6891,6900, and 6901 as triggers. Then set the public ports to
1863,5190-6901. If that does not work, set the incoming ports to 1-64535
(note: this opens a WIDE range of ports) and add in 5190 and 1863 as