Driver Installation - SMC Networks EZ Connect SMC2602W User Manual

4 | Driver Installation

NOTE: Installation processes will require the use of your original, licensed copy of Windows.
Please have your Windows CD available BEFORE proceeding with the installation.
Windows 98
Step 1: After you have inserted the SMC2602W 11Mbps Wireless PCI Card in your machine, the
Operating System will automatically recognize the adapter and prompt you for the appropriate
drivers. Click the [Next >] button to begin the installation.
Step 2: Insert the Driver CD and select the [Search for the best driver for your device] option
and click [Next >].
Step 3: Clear all checkboxes except for [Specify a location:]. Then press the [Browse] button
and look for the drivers on your CD-ROM. Browse to ?:\SMC2602W\WIN9XME. (Note: The "?"
equals the letter of your CD-ROM drive. In most cases, this is D.)
Figure 1.0
Step 4: The system should find the drivers. Click the [Next >] button to continue the installation.
The wizard will show "SMC2602W 11Mbps Wireless PCI Card".
(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display
a list of all the drivers...] option. Select [Network Adapters] from the list of devices, press [Have
Disk] and once again browse to the location of the drivers)