SMC Networks EZ Connect SMC2602W User Manual page 10

(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display
a list of the known drivers...] option. Select [Network Adapters] from the list of devices, press
[Have Disk] and once again browse to the location of the drivers)
Step 6: You have now completed the driver installation. Click [Finish] to initialize the adapter.
Windows XP
Step 1: After you have inserted the SMC2602W 11Mbps Wireless PCI Card in your machine and
turned it back on, the Operating System will automatically recognize the adapter and prompt you
for the appropriate drivers. Click the [Next >] button to begin the installation.
Step 2: Insert the Driver CD and check the [Include this location in the search] option. Make
sure the [Search removable media] option is not checked. Click [Browse] and find the location of
the drivers. This should be ?:\SMC2602W\WIN2KXP. (Note: The ? equals the letter of your CD-
ROM drive. In most cases, this is D.) Then click [Next >].
Figure 1.5
Step 3: This process will be completed once the drivers are copied to the hard drive and
installed. Please click [Finish] to exit the wizard.
After clicking [Finish], you will see the following message in your system tray: