Fender Mustang LT25 Owner's Manual page 19

MENU FUNCTION: FOOTSWITCH
Connect an optional Fender single-button footswitch (PN 0994052000) by plugging it into the "FTSW" jack
on the control panel. The footswitch provides convenient hands-free switching between two pre-determined
"quick-access" presets. The second MENU function—FOOTSWITCH—enables easy configuration of any two
presets for quick-access footswitch use. To do this, press the MENU utility button, then use the ENCODER to
scroll to and select FOOTSWITCH:
05
DREAMY
Two presets will be shown in the DISPLAY WINDOW below the header "QUICK ACCESS"; the upper preset is au-
tomatically highlighted in blue. To choose a new preset for this upper quick-access position, press the ENCOD-
ER on it; the box surrounding the preset name will turn red. Use the ENCODER to scroll to a new preset for the
upper quick-access position:
QUICK ACCESS
01
FENDER CLEA
02
SILKY SOLO
Press the ENCODER to select the new upper quick-access preset; the box surrounding the preset name will
return to blue. To choose a new preset for the lower quick-access position, turn the ENCODER clockwise to
highlight the lower preset, then follow the same steps as above:
QUICK ACCESS
14
POWER PUNCH
02
SILKY SOLO
IMPORTANT: If quick-access footswitch presets are not saved, the quick-access preset slots will revert to
their original contents when returning to the preset after leaving it, or when turning the amplifier off and
back on again. To save quick-access footswitch presets, follow the SAVE, SAVE AS or REPLACE instructions on
pages 6 and 7.
MENU
TUNER
FOOTSWITCH
SETTINGS
RESTORE
QUICK ACCESS
14
POWER PUNCH
02
SILKY SOLO
QUICK ACCESS
14
POWER PUNCH
08
THRASH OVER
17