Opening Comment Entry Function - Icom IC-M73 Instruction Manual

7
FUNCTION MODE OPERATION
D Channel name programming
q Push [Y]/[Z] to select a channel to
program.
• Hold down [CH/WX•U/I/C] for 1 second
to select a channel group, if necessary.
w Push [F] to enter the function mode,
and then push [Y]/[Z] to select the
channel naming function.
• "CH NAME" appears.
e Push [H/L•KEY] to edit the channel
name.
• The 1st character of the currently
programmed name blinks.
r Push [Y]/[Z] to select a character.
t Push [CH/WX• U/I/C] to move to the
right; then push [Y]/[Z] to select a
character.
• Pushing [SCAN•DUAL], moves to left
y Continue until the desired charac-
ters have been selected, then push
[H/L•KEY] to return to normal opera-
tion.
22
■ Opening comment entry
function
The IC-M73/IC-M73EURO has a capability to assign up to
10-character opening comments.
You may replace the factory-set opening comment with
a comment of your own. The opening comment appears
each time the IC-M73/IC-M73EURO is powered ON. The
comment may be up to 16 characters long.
You can use same characters as "Channel naming function."
(p. 22)
D Opening comment programming
q Push [F] to enter the function mode,
and then push [Y]/[Z] to select the
channel naming function.
• "OC EDIT" appears.
w Push [H/L•KEY] to edit the opening
comment.
• The 1st character of the currently
programmed comment blinks.