SMC Networks EliteConnect SMCWHSG14-G User Manual page 63

Item Default
RADIUS Authentication Disable
Time to Finish/ Enable
Accumulation
Primary RADIUS Server
Server IP Empty
Authentication Port 1812
Accounting Port 1813
Share Secret Key Empty
Secondary RADIUS Server
Server IP Empty
Authentication Port 1812
Accounting Port 1813
Share Secret Key Empty
Retry times when 1
Primary fail
62
Description
Option: No Authentication or RADIUS Server.
Disable (No Authentication) ―
Subscriber can direct access the Internet without enter
username and password.
Enable (RADIUS Authentication) ―
Wireless Hotspot Gateway provides "RADIUS Authentication"
for service provider to build up an Internet service with
RADIUS server. If RADIUS Authentication is enabled, all
subscribers' authentication will send to RADIUS Server by
RADIUS protocol (RFC 2865, 2866).
Service provider provides two different accounting calculate
for the Internet service.
Enter the IP address of RADIUS server.
Enter the authentication port number; the authentication port
number must match with the RADIUS server setting. The
allowed numbers are from 0 to 65535.
Enter the accounting port number; the accounting port number
must match with the RADIUS server setting. The allowed
numbers are from 0 to 65535.
The share secret key, the key number also has to match with
the Server setting. Up to 64 characters are allowed.
Enter the IP address of RADIUS server.
Enter the authentication port number; the authentication port
number must match with the secondary RADIUS server
setting. The allowed numbers are from 0 to 65535.
Enter the accounting port number; the accounting port number
must match with the secondary RADIUS server setting. The
allowed numbers are from 0 to 65535.
The share secret key, the key number also has to match with
the secondary RADIUS Server setting. Up to 64 characters are
allowed.
Specify the retry times when primary fail.
SMCWHSG14-G