Advertisement
About Advanced Features & Operation
FACTORY DEFAULTS - If, for any reason, you desire to return all the stored
settings back to the factory default settings, follow the instructions below.
WARNING: This will reset all Advanced Programming to the default
settings. Any information entered prior to this reset will be
permanently lost.
1
Place the thermostat in the OFF mode.
MODE
2
Press and hold the MODE button. While
MODE
holding the MODE button, press and hold
the DOWN button for 5 seconds. All icons
will appear on the display.
3
After all of the icons appear, release the
FAN
MODE and DOWN buttons. Then press and
hold the FAN button for 5 seconds.
4
After the letters Fd appear on the display
MODE
(Factory Default), release the FAN button.
Press the MODE button twice to return to
normal operation.
19
OFF
Setup
unoccupied
Locked
Override
AUTO
OUTSIDE
ONOFF
Fan
Hide quick links:
Advertisement
