Carbon Monoxide Detectors - DSC HS2TCHP v1.2 User Manual

Hide thumbs Also See for HS2TCHP v1.2:
Table of Contents

Advertisement

Available languages

Available languages

Guidelines for Locating Smoke Detectors and CO Detectors
Figure 1
Figure 3a

Carbon Monoxide Detectors

Carbon monoxide is colorless, odorless, tasteless, and very toxic. It also moves freely in the air. CO detect-
ors can measure the concentration and sound a loud alarm before a potentially harmful level is reached. The
human body is most vulnerable to the effects of CO gas during sleeping hours; therefore, CO detectors
should be located in or as near as possible to sleeping areas of the home. For maximum protection, a CO
alarm should be located outside primary sleeping areas or on each level of your home. Figure 5 indicates the
suggested locations in the home.
Figure 13-
BEDROOM
GROUND
FLOOR
BASEMENT
CARBON MONOXIDE DETECTOR
Do NOT place the CO alarm in the following areas:
Where the temperature may drop below -10ºC or exceed 40ºC
l
Near paint thinner fumes
l
Within 5 feet (1.5m) of open flame appliances such as furnaces, stoves and fireplaces
l
In exhaust streams from gas engines, vents, flues or chimneys
l
Do not place in close proximity to an automobile exhaust pipe; this will damage the detector
l
BEDROOM
BEDROOM
GARAGE
KITCHEN
Figure 5
Figure 2
Figure 4
- 33 -
Figure 3

Advertisement

Table of Contents
loading

Table of Contents