Suzuki Ertiga Series Owner's Manual page 72

How to operate the setting mode:
1) When the ignition mode is "ON" and the
vehicle is stationary, push the trip meter
selector knob (1) to switch the informa-
tion display indication (C) to the trip
meter.
2) Push and hold the indicator selector
knob (2) until the display shows "
3) Turn and/or push the indicator selector
knob (2) to select a function that you
want to set up according to the above
chart.
4) Turn and/or push the indicator selector
knob (2) to register settings of the fol-
lowing functions.
Central door locking system " "
• : Unlock all doors by turning the
key, pushing the keyless push
start system remote controller
or request switch once
• : Unlock all doors by turning the
key, pushing the keyless push
start system remote controller
or request switch
(default setting)
Door locking and unlocking
buzzer " "
• : Buzzer sounds
doors (including the tailgate)
are locked or unlocked by
using the keyless push start
system remote controller or
". request switch (default set-
ting)
• : Buzzer does not sound when
the doors (including the tail-
gate) are locked or unlocked
by using the keyless push
start system remote controller
or request switch
Additional flashes
of the turn signal " "
• : Turn signal
times after the turn signal
lever is returned
(default setting)
• : Disable the additional flashes
of turn signal
twice
Security system " "
• : Enable the security system
(default setting)
• : Disable the security system
Initialization setting "
• : Initialize all settings
when the
EXAMPLE
NOTE:
• As shown in the above illustration,
" " indicates on the display of cur-
rently setting item.
• To go back to the higher level display
during operation, turn the indicator
selector knob (2) to display "
" " and then push the indicator
flashes three
selector knob (2).
5) To exit the setting mode, switch the dis-
play to show "
indicator selector knob (2).
BEFORE DRIVING
"
60MS113
" or
" and then push the
2-58
60MK1-82E