Hazard Warning Switch - Suzuki Ertiga Series Owner's Manual

BEFORE DRIVING
Turn Signal Operation
With the ignition mode "ON", move the
lever up or down to activate the right or left
turn signals.
Normal turn signal
EXAMPLE
Move the lever all the way upward or
downward to signal. When the turn is com-
pleted, the signal will cancel and the lever
will return to its normal position.
2-61
Lane change signal
EXAMPLE
Move the lever part-way in the direction to
turn and hold it there.
• The turn signal and its indicator flash
while the lever is held at the moved posi-
tion.
The turn signal and its indicator flash three
60MK118
times even if you return the lever immedi-
ately after moving it.
NOTE:
The turn signal and its indicator can be set
whether they flash three times after the
turn signal lever is returned via the infor-
mation display. Refer to "Information Dis-
play" in this section.
NOTE:
You can customize the setting for the num-
ber of times of flashing of the turn signal
and its indicator (1 to 4 times). Please ask
an authorized SUZUKI dealer for the cus-
tomization.

Hazard Warning Switch

60MK142
Push in the hazard warning switch to acti-
vate the hazard warning lights. All turn sig-
nal lights and both turn signal indicators
will flash simultaneously. To turn off the
lights, push the switch again.
Use the hazard warning lights to warn
other traffic during emergency parking or
when your vehicle could otherwise become
a traffic hazard.
74LHT0229
60MK1-82E