Burner - Miele KM 362 Operating Instructions Manual

Cleaning and care

Burner

The burner components are not
dishwasher safe.
The burner components should only
be cleaned by hand.
The surface of the burner caps will
become more matt with time. This is
quite normal and does not indicate
damage to the burner caps.
 The burner should be dismantled and
then cleaned by hand using a
solution of warm water and a little
washing-up liquid applied with a soft
sponge.
 Parts of the burner that cannot be
removed should be wiped clean with
a damp cloth only.
 The ignitor and ignition safety device
should be very carefully wiped clean
using a well wrung out cloth.
Do not let the ignitor get wet. If it gets
wet, it will not spark.
 After cleaning, dry all surfaces with a
clean cloth. Make sure that the flame
slits are completely dry.
30
Assembling the auxiliary, normal and
fast burners
a
c
d
f
e
 Place the burner head  onto the
burner base  so that the ignitor 
and the ignition safety device 
extend through their respective holes
in the burner head. The burner head
must click into place correctly.
 Place the burner cap  onto the
burner head  so that the locating
tabs fit into the notches in the burner
head.
Ensure parts are reassembled in the
correct order after cleaning.