Accessing the Test Set's Screens
Accessing the Test Set's Screens
CDMA and Analog Modes
The Test Set has two operating modes, analog and CDMA. In CDMA mode, the
Test Set configures itself as a calibrated CDMA base station. In Analog mode, the
Test Set has AMPS, NAMPS and TACS analog cellular phone test capability.
CDMA is the default power-up mode. To enter analog mode from CDMA mode:
•
press one of the ANLG SCRNS keys, or
•
select a screen from the Analog To Screen menu, or
•
programmatically select an analog screen using the display (DISP) HP-IB subsystem,
or
•
execute a CDMA to Analog handoff.
To enter CDMA mode from analog mode:
•
press one of the CDMA SCRNS keys, or
•
select a screen from the CDMA To Screen menu, or
•
programmatically select a CDMA screen using the display (DISP) HP-IB subsystem.
S:\HP8924C\USRGUIDE\BOOK\chapters\getstart.fb
Chapter 1, Getting Started
23