Using Remote (Hp-Ib) Control; Accessing The Call Processing Subsystem Screens - HP 8924C Application Manual

Using Remote (HP-IB) Control

In order to use the Analog Call Processing Subsystem remotely, a mobile station
must be connected to the Test Set and be powered on.

Accessing the Call Processing Subsystem Screens

The Call Processing Subsystem screens are accessed by selecting the
CONTROL
AUTHENTICATION
select a particular screen with the
Command Syntax chapter of the HP 8924C Condensed Programming Reference
Guide.
The Call Processing Subsystem screens are accessed by selecting the
CONTROL
using the :DISPlay command. The mnemonics used to select a particular screen
with the DISPlay command are shown in
The query form of the :DISPlay command (that is, :DISPlay?) can be used to
determine which screen is currently displayed.
N:\mkt\MANUALS\HP8924C\APPMOD\BOOK\chapters\amcproc.fb
Chapter 9, 264 Using the Analog Call Processing Subsystem
, , ,
CALL DATA CALL BIT
screens using the :DISPlay command. The mnemonics used to
DISPlay
, , ,
CALL DATA CALL BIT
Using Remote (HP-IB) Control
,
CALL CONFIGURE ANALOG MEAS, or
command are shown in HP-IB
, or
CALL CONFIGURE ANALOG MEAS
.
table 4
CALL
CALL
screens
277