Skil 2410 Operating/Safety Instructions Manual page 12

BM 1619X01525 06-06
Plug charger cord into your standard power
outlet, then insert tool into charger (Fig. 6).
The charge condition indicator lights shows the
charging progess.
The yellow and green charge condition
indicator lights on the tool will "BLINK" and the
red light will go "ON" and remain on during the
charging procedure.
This indicates that the battery is receiving a
fast charge. Fast-charging will automatically
stop when all three lights go "OFF".
FIG. 6
INDICATOR
CORD
6/14/06 11:30 AM
CHARGING THE TOOL
RED
LIGHT
YELLOW
INDICATOR
LIGHT
Page 12
After normal usage, the battery requires
approximately 3 to 5 hours charging time to
reach full capacity. The tool may be used even
though the lights may still be on. The lights
may require more than 3 hours to turn off
depending on temperature.
The purpose of the lights are to indicate that the
battery is fast-charging. It does not indicate the
exact point of full charge. The lights will turn off
in less than 3 hours if the battery was not
completely discharged.
When the battery is fully charged, unplug the
charger (unless you're charging another tool).
GREEN
INDICATOR
LIGHT
-12-
CHARGER