Set Up And Switch On Your Phone - Nokia 106 User Manual

Nokia 106 User Guide
4. USB connector
5. Flashlight
Avoid touching the antenna area while the antenna is in use. Contact with antennas
affects the communication quality and may reduce battery life due to higher power
level during operation.
Do not connect to products that create an output signal, as this may damage the
device. Do not connect any voltage source to the audio connector. If you connect an
external device or headset, other than those approved for use with this device, to
the audio connector, pay special attention to volume levels.
Parts of the device are magnetic. Metallic materials may be attracted to the device.
Do not place credit cards or other magnetic storage media near the device, because
info stored on them may be erased.
Some of the accessories mentioned in this user guide, such as charger, headset, or
data cable, may be sold separately.
Note: You can set the phone to ask for a security code. The pre-set code is 12345. Change
it to protect your privacy and personal data. Note, however, that when you change the
code, you need to remember the new code, as HMD Global is not able to open or bypass it.

Set up and switch on your phone

Learn how to insert the SIM card, memory card, and battery, and how to switch on
your phone.
MINI SIM
Important: This device is designed to be used with a mini SIM card (see figure) only.
Use of incompatible SIM cards may damage the card or the device, and may corrupt
data stored on the card.
© 2019 HMD Global Oy. All rights reserved.
10. Microphone
6