Monitor Components - A&D UA-651-AC Series Instruction Manual

DC jack
Artery position mark
Pr9per fit range
AC adapter Plug
Display
Clock Button
(j) Start Hutton
I Button
Air Socket
aSa
Arm Cu
Index mark
Air Connector Plug
Battery Compartment
Battery Cover
MEMORY
Systolic Pressure
.flflfl/
- -.
mmng
Diastolic Pressure
Monitor Components
Display
Pressure Bar Indicator and
11
JNC7 Classification Indicator
. IA
mmHg
al
Pulse Rate
Heart Mark
Measurement In Progress
min
Date and clock display
Battery Indicator lR.B. Symbol
çlrregss{ar heartbeat symbol)
E-6
Symbols
Symbols that appear on the display:
Symbols Function/Meaning Recommended Action
Appears while measurement is in
progress. It blinks when the pulse is
detected.
Measurement is in progress.
Remain as still as possible.
Irregular Heartbeat symbol (t.H.B.)
Appears when an irregular heartbeat
is detected. It may light when a
very slight vibration like shivering or
shaking is detected.
M
Previous measurements stored in
memory.
FULL BATTERY
The battery power indicator during
measurement.
rfj
LOW BATTERY
The battery power is tow when it
blinks,
Replace all batteries with
new OfleS: when the indicator
blinks.
11 A
Err
Unstable blood
pressure
due to
movement during the measurement.
Take another measurement.
Remain still during the
measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during the inflation.
The cuff is not applied correctly.
Pulse display error. The pulse is not
detected correctly.
Apply the cuff correctly, and try
the measurement again.
Err
c
L
-
Device internal error
Remove the batteries and
press the Ii) button, and then
install the batteries again. If
the error still appears, contact
the dealer.
Eec
AM Time in the mowing
PM Time in the afternoon
E-7