Table of Contents
Advertisement
Troubleshooting
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact an authorized
technician.
Problem
• Please check the power connection.
Nothing appears on
• Please check the video signal line connection.
the screen.
• Please check and make sure that the auto lens
switch is set to DC (VIDEO) when using a DC
(VIDEO) lens.
• Please check the Brightness of Auto Iris lens.
• Please check if the lens is clean.
The video image is
Please clean the lens with a clean cloth or brush.
not clear.
• Please adjust the contrast feature of the
monitor.
• Please make sure that the screen is not exposed
directly to a bright light.
Please move the camera if necessary.
• Please readjust the back focus of the camera.
• Please adjust the contrast feature of the monitor.
The screen is dark.
• If you have an intermediate device, set the 75Ω/
Hi-z properly, and check the terminals. (refer to
page 18)
• Please check if an auto iris lens is being used
and adjust the brightness level.
There is a problem with the
• Please check if an appropriate power source to
camera operation. The
the camera complies with the manufacturer's
camera surface is too hot
standard requirement, or if the voltage keeps
and black stripes appear on
changing.
the screen.
36
COLOR CCD CAMERA
Solution
User's Manual
Problem
The MOTION
• Please check if 'MOTION DETECTION' mode is
DETECTION function
turned on.
is not working.
• Please check if the MD LEVEL is too low.
• Please check the setting of the MD AREA.
Colors are not quite
• Please check the 'WHITE BAL' setting. (Please
right.
refer to page 25)
The screen is
• Please check if the camera is facing directly into
flickering.
sunlight or fluorescent light.
• Please check if an auto iris lens is being used.
• Please check the connection of the lens connector
cable.
L/L mode isn't able to
• Have you connected your camera to DC power
be selected.
source? Connect it to AC power source.
SENS-UP function is
• Please check if the AGC menu is set to the OFF
not working.
position.
• Please check if the SHUTTER menu is set to
MANUAL mode.
• Please check the limit of SENS-UP AUTO mode.
37
COLOR CCD CAMERA
Solution
User's Manual
Advertisement
Table of Contents
