C h a p t e r
Application Configuration
Configuring UPnP (Fat AP)
This section describes how to configure UPnP.
Context
The AP mode of the device is Fat.
Universal Plug and Play (UPnP) supports zero-configuration connection. This
function helps to discover various network devices automatically.
A devices supporting UPnP can access the network dynamically, obtain the IP
address, and send its performance information. If there are DHCP and DNS
servers, the device can obtain the DHCP and DNS services automatically.
A devices supporting UPnP can be disconnected from the network
automatically without affecting the device itself or other devices in the
network.
Steps
1. Select Application > UPnP. The following page is displayed.
Confidential and Proprietary Information of ZTE CORPORATION 56
6