Zte ZXV10 W615 User Manual page 52

ZXV10 W615 User Manual
2. Configure the parameters. Refer to the following table.
Parameter
Enable
Protocol
Name
Source IP Address
End Source IP Address
Start Destination IP
50 Confidential and Proprietary Information of ZTE CORPORATION
Description
Enables or disables the IP filter function.
The available options are ANY, TCP, User Datagram
Protocol (UDP), TCP AND UDP, and Internet Control
Message Protocol (ICMP). ANY refers to any protocol.
Refers to the IP filter name. The length is 1 to 256
characters.
Start IP address of the source (LAN side).
End IP address of the source (LAN side).
Start IP address of the destination.