Setting Security Information - Zte ZXV10 W615 User Manual

ZXV10 W615 User Manual
Parameter
Priority
VLAN ID
802.1p
As Management SSID
3. Click Submit.
—END OF STEPS—

Setting Security Information

This section describes how to set WLAN security information.
Steps
1. Select Network > WLAN > Security. The following page is displayed.
2. Configure the parameters. Refer to the following table.
20 Confidential and Proprietary Information of ZTE CORPORATION
Description
Specifies the SSID priority. The range is 0–7. The
default value is 0, which means no priority. A greater
value indicates a higher priority.
VLAN tag of data packets. VLAN ID can be set in a
range of 0-4094.
Specifies the processing priority. The range is 0–7. The
default value is 0, which means no priority. A greater
value indicates a higher priority.
Disabled by default. When this function is enabled, the
user associated with the SSID can manage the device.