Front Panel - Pace IPW8000 Installation Manual

Front panel

The illustration shows the interface elements on the front of the set-top box.
Power button USB port LED button Menu button OK button
Model number Status lights Arrow buttons
Power button
Turns the set-top box on or off.
Power light
Lights green when the set-top box is powered on. Blinks when receiving input from the
remote control or when the front-panel buttons are pressed.
Model number
Identifies the model number of the set-top box.
USB port
Reserved for future use.
WI-FI light
Lights green to indicate the strength of the Wi-Fi signal. Five bars equals full strength.
LINK light
Lights green when the box has a good connection to the provider network.
HD light
Lights blue to indicate a high-definition input signal.
REC light
Lights red when the DVR is recording content.
WPS light
Blinks green during Wi-Fi Protected Setup pairing with the home network. Lights solid
green for approximately five minutes if device pairing is successful.
LED button
Adjusts the brightness of the LED lights.
MENU button
Launches the on-screen menu.
Arrow buttons
Navigates to on-screen menu options.
OK button
Confirms the on-screen menu choice.
11