Bosch GSR 18V-60 FC Professional Original Instructions Manual page 15

temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of bat-
u
tery packs should only be performed by the manufacturer
or authorized service providers.
Safety information for drills and screwdrivers
Use auxiliary handle(s), if supplied with the tool. Loss
u
of control can cause personal injury.
Hold the power tool by insulated gripping surfaces,
u
when performing an operation where the cutting ac-
cessory or fasteners may contact hidden wiring. Cut-
ting accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the op-
erator an electric shock.
Switch the power tool off immediately if the applica-
u
tion tool becomes blocked. Be prepared for high
torque reactions which cause kickback. The applica-
tion tool becomes blocked when it becomes jammed in
the workpiece or when the power tool becomes over-
loaded.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
In case of damage and improper use of the battery, va-
u
pours may be emitted. Ensure the area is well-ventilated
and seek medical attention should you experience any ad-
verse effects. The vapours may irritate the respiratory
system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water and moisture. There is a risk of explo-
sion.
Read the corresponding operating instructions for inform-
u
ation about the GCY 30-4 Bluetooth
Bosch Power Tools
u
The Bluetooth
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal and plastic.
The power tool can be used with an angle screw drill chuck
adapter (GFA 18-W or GFA 18-WB), an off-set angle adapter
(GFA 18-E), a drill chuck adapter (GFA 18-B) or a metal drill
chuck adapter (GFA 18-M).
With the GCY 30-4 Bluetooth
ted in the power tool, data and settings of the power tool can
be transferred between the tool and a mobile device by
means of Bluetooth
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
®
Low Energy Module.
Caution! When using the power tool with Bluetooth
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
®
Bluetooth in aircraft. Avoid using the product near
your body for extended periods.
®
word mark and logos are registered trade-
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
®
wireless technology.
(1) Holder
(2) Locking sleeve
(3) Torque presetting ring
(4) Gear selector switch
(5) Cover for GCY 30-4 Bluetooth® Low Energy Module
A)
(6) Battery
(7) Battery release button
(8) Worklight
(9) Rotational direction switch
(10) On/off switch
(11) Metal drill chuck adapter GFA 18-M
(12) Drill chuck adapter GFA 18-B
English | 15
®
in the vicinity of
®
Low Energy Module that is fit-
A)
A)
A)
1 609 92A 4RU | (31.10.2018)
®
, a