Starting Warm Engine - Echo SHC-2620 Operator's Manual

Shaft hedge trimmer
Hide thumbs Also See for SHC-2620:
Table of Contents

Advertisement

SHC-2620
The blades must not move at idle, otherwise serious personal
injury may result. Periodic carburetor adjustment may be
necessary to assure blades do not move at idle. If blades move,
readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your dealer.
6.
Throttle Trigger
After engine warm-up, grip the throttle handle and support handle.
Depress the throttle trigger lockout, and gradually depress throttle trigger
to increase engine RPM to operating speed.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the
choke, and do not depress throttle trigger to wide open position.
The blades must not move at idle, otherwise serious personal
injury may result. Periodic carburetor adjustment may be
necessary to assure blades do not move at idle. If blades move,
readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your dealer.
1.
Stop Switch
Move stop switch (A) away
from the STOP position.
X7502342002
© 03/2019 ECHO Inc.
OPERATION
A
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents