Product Specifications - Ryobi RIG2000PCB Original Instructions Manual

English | Original instructions
Storage time
Less than 2 months • Drain fuel from the tank and dispose of
in a suitable container according to state
and local ordinances.
2 months to 1 year • Drain fuel from the carburettor.
• Drain fuel from the tank and dispose of
in a suitable container according to state
and local ordinances.
1 year or more • Drain fuel from the carburettor.
• Remove the spark plug.
• Drain fuel from the tank and dispose of
in a suitable container according to state
and local ordinances.
• Put a tablespoon of engine lubricant into
the spark plug cylinder. Turn the engine
slowly with the pull rope to distribute the
lubricant.
• Reinstall the spark plug.
• Change the engine lubricant.
NOTE: If storing fuel in suitable container for later use,
make sure the fuel has been treated with fuel stabilizer
according to the stabilizer manufacturer's instructions.
11
Before storing

PRODUCT SPECIFICATIONS

Model
AC Output
AC frequency (Hz)
AC output voltage (V)
Max. rated AC output (W)
Max. rated current (A)
Main on/off switch (A)
Power Factor
DC Output
DC output voltage (V)
Max. rated current (A)
Engine
Engine type
Spark plug
Bore x Stroke (mm)
Displacement (cc)
Starting system
Fuel type
Lubrication oil
Engine oil volume (l)
Fuel tank capacity (l)
Max. output (W)
Output speed (rpm)
Run time (Full load)
Run time (Half load)
Approvals
AS/NZS 3010
EPA
EMC
Uncertainty dB
Noise level (4 m) LpA dB (A)
Noise level (7 m) LpA dB (A)
Noise level LwA dB (A)
RIG2000PCB
50
240
1600
6.67
16
1.0
5
2.1
Single overhead valve
(SOHV)
NGK BPR7HS,
TORCH E6RTC
48 x 43
80
Recoil
Unleaded fuel
SAE 10W-30
0.35
4.5
2000
3050~5000
4 hrs
7.4 hrs
Yes
Yes
Yes
3
68
63
91