Coolant - Yamaha MTN690-U 2019 Owner's Manual

Table of Contents

Advertisement

1
2
1. Engine oil
er cap
2. O-ring
11. Install and tighten the engine oil
ller cap.
12. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off
and check for the cause.
TIP
After the engine is started, the engine
oil pressure warning light should go off.
NOTICE
If the oil pressure warning light ick-
ers or remains on even if the oil level
is correct, immediately turn the en-
gine off and have a Yamaha dealer
check the vehicle.
Periodic maintenance and adjustment
13. Turn the engine off, wait a few
minutes until the oil settles, and
then check the oil level and cor-
rect it if necessary.
Why Yamalube
YAMALUBE oil is a Genuine YAMAHA Part
born of the engineers' passion and belief
that engine oil is an important liquid engine
component. We form teams of specialists in
the fields of mechanical engineering, chem-
istry, electronics and track testing, and have
them develop the engine together with the oil
it will use. Yamalube oils take full advantage
of the base oil's qualities and blend in the
ideal balance of additives to make sure the
final oil clears our performance standards.
Thus, Yamalube mineral, semisynthetic
and synthetic oils have their own distinct
characters and value. Yamaha's experience
gained over many years of research and
development into oil since he 1960's helps
make Yamalube the seal choice for your
Yamaha engine.
ECA20860
6-12

Coolant

The coolant level should be checked
regularly. In addition, the coolant must
be changed at the intervals sp
the periodic maintenance chart.
Recommended coolant:
YAMALUBE coolant
Coolant quantity:
Coolant reservoir (max level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
Radiator (including all routes):
1.60 L (1.69 US qt, 1.41 Imp.qt)
TIP
If genuine Yamaha coolant is not avail-
able, use an ethylene glycol antifreeze
containing corrosion inhibitors for alu-
minum engines and mix with distilled
water at a 1:1 ratio.
To check the coolant level
Since the coolant level varies with en-
gine temperature, check when the en-
gine is cold.
1. Park the vehicle on a level surface.
EAUS1203
ed in
6
EAU20097

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtn690-a 2019

Table of Contents