Yamaha MTN690-U 2019 Owner's Manual page 23

Clock
1
1. Clock
The clock uses a 12-hour time system.
When the main switch is not in the
"ON" position, the clock can be viewed
for 10 seconds by pushing the left set
button.
To set the clock
1. Turn the key to "ON".
2. Push the left set button and right
set button together for two sec-
onds. The hour digits will start
flashing.
3. Use the right set button to set the
hours.
4. Push the left set button, and the
minute digits will start flashing.
Instrument and control functions
5. Use the right set button to set the
minutes.
6. Push the left set button and then
release it to start the clock.
Fuel meter
1
1. Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The segments of
the fuel meter disappear from "F" (full)
towards "E" (empty) as the fuel level
decreases. When the last segment of
the fuel meter starts flashing, refuel as
soon as possible.
TIP
The fuel meter is equipped with a self-
diagnosis function. If a problem is de-
tected in the fuel meter electrical cir-
3-8
cuit, the fuel meter will
repeatedly. If this occurs, have a
Yamaha dealer check the vehicle.
Eco indicator
1
1. Eco indicator "ECO"
The eco indicator comes on when the
vehicle is being operated in an environ-
mentally friendly, fuel-efficient manner.
The indicator goes off when the vehicle
is stopped.
TIP
Consider the following tips to reduce
fuel consumption:
Avoid high engine speeds during
acceleration.
at a constant speed.
flash
3