Yamaha MTN690-U 2019 Owner's Manual page 25

TIP
ush the right set button to
change the display in the reverse
order.
The fuel reserve tripmeter comes
on automatically, while the bright-
ness control mode is accessed
separately.
Odometer and tripmeters
The odometer shows the total distance
traveled by the vehicle.
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, use the left set
button to display the tripmeter you
want to reset, and then push the right
set button for one second.
TIP
he odometer will lock at 999999.
The tripmeters will lock at 9999.9
but can be manually reset.
Fuel reserve tripmeter
When the fuel level becomes low, the
last segment of the fuel meter will start
flashing. The fuel reserve tripmeter
Instrument and control functions
F" will automatically appear and
start counting the distance traveled
from that point. In this case, push the
left set button to switch the display in
the following order:
F km/L or L/100 km
_._ km/L or AVE_ _._ L/100 km
°C Air_ _ ° ODO
2 F
For the UK
F km/L, L/100 km or M G
AVE_ _._ km/L, AVE_ _._ L/100 km or
AVE_ _._ M _ _ °C Air_ _ °
ODO 1 2
TIP
ush the right set button to
change the display in the reverse
order.
You can manually reset the fuel re-
serve tripmeter, or after refueling
and traveling 5 km (3 mi) it will re-
set automatically and disappear
from the display.
3-10
Instantaneous fuel consumption
AVE_
_ _
1
1. Instantaneous fuel consumption display
This function calculates the fuel con-
sumption under current riding condi-
tions.
The instantaneous fuel consumption
F
can be set to either "km/L", "L/100 km"
or (for the UK).
"km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
"L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
(for the UK): The distance
that can be
1.0 Imp.gal of fuel under the cur-
rent riding conditions is shown.
1
3
traveled on