Crosley XSS23G Owner's Manual And Installation Instructions page 24

INSTALLING THE REFRIGERATOR (Cont .)
PUT THE REFRIGERATOR IN
4
PLACE
Move the refrigerator to its final location .
LEVEL THE REFRIGERATOR
5
The refrigerator can be leveled by adjusting the
rollers located near the bottom hinges .
Rollers have three purposes:
• Rollers adjust so the door closes easily when
opened about halfway . (Raise the front about
5/8" [16 mm] from the floor.)
• Rollers adjust so the refrigerator is firmly
positioned on the floor and does not wobble .
• Rollers allow you to move the refrigerator
away from the wall for cleaning .
To adjust the rollers on 23' (33" wide),
25' models:
• Turn the roller adjusting screws clockwise
to raise the refrigerator, counterclockwise to
lower it. Use a 3/8" hex socket or wrench, or
an adjustable wrench .
Roller adjusting screw
24
Installation Instructions
Raise
Rollers
LEVEL THE DOORS
A Adjust the refrigerator door to make the doors
even at the top .
B
To align:
Using a 7/16" wrench, turn the door adjusting
screw to the right to raise the door, to the left to
lower it .
NOTE:
A nylon plug, imbedded in the threads of the
pin, prevents the pin from turning unless a
wrench is used .
After one or two turns of the wrench, open
and close the refrigerator door and check the
alignment at the top of the doors .
Doors should be even at top
6
Raise
7/16" wrench
49-1000105 Rev. 0