Crosley XSS23G Owner's Manual And Installation Instructions page 10

Doors
Refrigerator Doors
The refrigerator doors may feel different than the ones
you are used to . The special door opening/closing
feature makes sure the doors close all the way and are
securely sealed .
When opening and closing the door you will notice a stop
position . If the door is opened past this stop point, the
door will remain open to allow you to load and unload
food more easily . When the door is only partially open, it
will automatically close .
The resistance you feel at the stop position will be
reduced as the door is loaded with food .
Door Alignment
If doors are uneven, adjust the refrigerator door .
To remove the base grille, open the doors, remove the
screw at each end of the base grille and then pull the
grille straight out .
1. U sing a 7/16" socket wrench, turn the door adjusting
screw to the right to raise the door; to the left, to
lower it . (A nylon plug, imbedded in the threads of the
pin, prevents the pin from turning unless a wrench is
used .)
2 . After one or two turns of the wrench, open and close
the refrigerator door and check the alignment at the
top of the doors .
10
(on some models)
7/16" Socket Wrench
Raise
49-1000105 Rev. 0