Crosley XSS23G Owner's Manual And Installation Instructions page 18

MOVING THE REFRIGERATOR
LOADING THE REFRIGERATOR
1
ONTO A HAND TRUCK
Leave all tape and door pads on doors until
the refrigerator is in its final location .
To move the refrigerator, use a padded
hand truck . Center the refrigerator on the
hand truck and secure the strap around the
refrigerator .
DO NOT OVERTIGHTEN THE STRAP.
REMOVE THE BASE GRILLE
2
Remove the grille by removing the two
Phillips head screws.
18
Installation Instructions
If the refrigerator must go through any
entrance that is less than 38" wide, the
doors must be removed . Proceed to
Step 3 .
DO NOT remove the handles.
If all entrances are more than 38" wide,
skip to Installing the Refrigerator .
DISCONNECT THE WATER
3
COUPLING (on some models)
If the refrigerator has a water dispenser,
there is a water line from the cabinet into the
bottom hinge on the freezer door that must be
disconnected .
To disconnect, push in on the white collar of the
coupling and pull out the tubing .
Bottom
freezer
hinge
White collar
49-1000105 Rev. 0