Advertisement
CHECK DRAIN CONNECTIONS
Operate Lift Rod and fill lavatory with water. Check that
DRAIN STOPPER (1) makes a good seal and retains water
in lavatory. Adjust stopper height by repositioning Lift
Rod (2) and tightening Thumbscrew (3).
Release DRAIN STOPPER (1) and check all drain
connections and "P" trap for leaks. Tighten if necessary.
SERVICE
To change direction of handle rotation,
proceed as follows:
Turn valve to OFF position.
Pull out INDEX CAP (1) and remove
HANDLE SCREW (2).
Pull off HANDLE (3) and unscrew
ESCUTCHEON BASE (4).
Remove SPRING CLIP (6).
Lift STOP WASHER (5), turn 90 and replace.
Replace SPRING CLIP (6).
Reinstall ESCUTCHEON (4) and HANDLE
ASSEMBLY.
If spout drips, operate handles several times
from OFF to ON position. Do not force - handles
turn only 90 .
EverClean™ Finish Care Instructions
American Standard's EverClean finish will wipe clean with a soft, dry cloth. A soft cloth with clean
water may also be used, if desired. No additional cleaning products are required.
DO NOT USE: Soaps, acid, polish, abrasives, harsh cleaners, or a cloth with a coarse surface.
2
3
2
90
6
1
1
3
4
5
Advertisement
