Switching On The Device - Siemens SIMATIC Panel PC 677 Operating Instructions Manual

Operating and parametrizing
7.1 Startup
Requirements
• A USB keyboard is connected.
Procedure

1. Switching on the device

2. Install Microsoft Windows operating system.
3. Installing applications and drivers.
7.1.2 Switching on the device
Procedure
1. Plug the power plug of the supplied power supply cable in the AC/DC power supply
2. Lock the power plug in place.
3. Plug the power supply cable of the computer unit into a socket with a grounded protective
4. Plug the computer unit into the power switch.
7-2
connector of the computer unit.
conductor.
The "POWER" LED will light up. The device starts up and boots.
Self Test
After connection to the power supply, the device performs a self test. During the self test,
the message "Press <F2> to enter SETUP" appears briefly.
When the self test is finished, the operating system will be loaded.
SIMATIC PC Panel PC 677/877, Control Unit
Operating Instructions, Edition 04/2005, A5E00407724-01