Table of Contents
Advertisement
CONTROL COMPONENTS AND SPECIFICATION
b) 2
c) 4
3) Need to check:
a) Ensure the laundry in a balanced distribution.
b) Check whether the water in the system is completely draining or not.
c) Ensure that there are 24 PIP in the system drive ( Run Line Test Routine
d) Ensure that the capacitor doesn't have degraded.
e) Check whether the system is running smooth.
RID#2.7. POWER ERROR
1) When the input voltage at consumer end falls below 170V & above 270V then "PE"
When the input voltage at consumer end falls below 170V & above 270V then "PE"
When the input voltage at consumer end falls below 170V & above 270V then "PE"
error will be detected.
rror will be detected.
2) Need to check:
a) Ensure that the Input voltage is above 170V & below 270V
b) Check for PCB operation.
RID#2.8. LID OPEN ERROR
1) If there is no feedback from Lid Switch, then "Lid Op
If there is no feedback from Lid Switch, then "Lid Open" error will be popped till
getting the feedback.
getting the feedback.
2) Need to check:
a) Ensure the Lid is firmly closed
b) Check for Lid switch operation & its connections
c) Check for PCB operation.
RID#2.9. tSC ERROR
1) If Keys are shorted, then 'tSC' error will be popped & this error is applicable only in
Keys are shorted, then 'tSC' error will be popped & this error is applicable only in
Keys are shorted, then 'tSC' error will be popped & this error is applicable only in
Test Routines.
2) Need to check:
a) Ensure that there is a required interval given while invoking Test Routines.
b) Check for Keys shorted in User Interface
AND SPECIFICATION
nd
rd
& 3
detection, system waits for consumer intervention to open the Lid
detection, system waits for consumer intervention to open the Lid
detection, system waits for consumer intervention to open the Lid
distribute the cloths and then to press start key
distribute the cloths and then to press start key
th
detection will be a permanent Ub error &
detection will be a permanent Ub error & the same cannot be rectified by
the consumer
the consumer
Ensure the laundry in a balanced distribution.
Check whether the water in the system is completely draining or not.
Check whether the water in the system is completely draining or not.
Ensure that there are 24 PIP in the system drive ( Run Line Test Routine
Ensure that there are 24 PIP in the system drive ( Run Line Test Routine
there is any PIP breakage there it will be detected as "PIP")
here is any PIP breakage there it will be detected as "PIP")
here is any PIP breakage there it will be detected as "PIP")
Ensure that the capacitor doesn't have degraded.
Check whether the system is running smooth.
Ensure that the Input voltage is above 170V & below 270V
Ensure that the Input voltage is above 170V & below 270V
Check for PCB operation.
Ensure the Lid is firmly closed
Check for Lid switch operation & its connections
Check for PCB operation.
Ensure that there is a required interval given while invoking Test Routines.
Ensure that there is a required interval given while invoking Test Routines.
Keys shorted in User Interface
SERVICE MANUAL
the same cannot be rectified by
n" error will be popped till
if
Page | 28
Hide quick links:
Advertisement
Table of Contents
