Table of Contents
Advertisement
CONTROL COMPONENTS AND SPECIFICATION
RID#1 Main Function
RID#1 .1 LOAD SENSING
Load Sensing Animation
Load Sensing Animation
1) Decides the Required W
RID#1 .2 BALANCE SPIN
1) Used to Distribute
2) Unbalance(Ub) checking Point:
RID#1 .3 KEY LOCK
1) In order to lock the Keys
that Keys will get Lock
2) Key lock can be invoke
3) There will be no response for any key press while the system remains in Key Lock
There will be no response for any key press while the system remains in Key Lock
There will be no response for any key press while the system remains in Key Lock
mode and the corresponding LED will blink 5 times.
mode and the corresponding LED will blink 5 times.
4) In order to unlock, Press
In order to unlock, Press Delay End and Extra Rinse key simultaneously
5) During Errors, Keylock feature will get disabled
During Errors, Keylock feature will get disabled for Power & start/pause key
depending on the type of Errors.
depending on the type of Errors.
th
RID#1 .4 6
SENSE
th
1) 6
Sense LED will be t
Sense LED will be turned ON whenever Load sensing happens
Water level program 6
Water level program 6
th
2) 6
Sense LED will go to Off whenever Error pops up durin Auto Water Level
Sense LED will go to Off whenever Error pops up durin Auto Water Level
Sense LED will go to Off whenever Error pops up durin Auto Water Level
Program.
AND SPECIFICATION
Required Water level with respect to the Mass of Cloth Load
a) Evaluates
Evaluates the water level with dry laundry at the of wash
b) P1 (Daily Wash
Daily Wash), P4 (Easy Iron), P6(Bed linen), P8(C
this Load sensing
Load sensing process
c) Finalize
Finalize the water level by slot sensor output data during
between 30-150 rpm
between
d) Indication for Load sensing is by means of
Indication for Load sensing is by means of "Auto" Water level LED.
istribute the Unbalanced Cloth Load.
checking Point:
a) During S
During SIS, if the system fails to attain 50 to 150 R
IS, if the system fails to attain 50 to 150 Rpm / 150 to 300 Rpm /
if the Off balance threshold value gets crossed within a specified tenure
if the Off balance threshold value gets crossed within a specified tenure
if the Off balance threshold value gets crossed within a specified tenure
then control move
control moves to Ub error
b) Self Correction process will be processed once while detecting "Ub" for
Self Correction process will be processed once while detecting "Ub" for
Self Correction process will be processed once while detecting "Ub" for
the first time in a wash cycle.
the first time in a wash cycle.
c) During Self Correction p
During Self Correction process, Water will be filled & the cloth load will
be distributed by means of specified Wash Strokes.
be distributed by means of specified Wash Strokes.
be distributed by means of specified Wash Strokes.
the Keys, Press Delay End and Extra Rinse key simultaneously
Locked & the corresponding LED will start glowing.
invoked only when the system is in running mode
d only when the system is in running mode.
th
Sense LED will be Turned ON.
SERVICE MANUAL
to the Mass of Cloth Load
wash process
(Colors) will follow
output data during 60 sec of sensing
Water level LED.
ater will be filled & the cloth load will
inse key simultaneously so
LED will start glowing.
inse key simultaneously
for Power & start/pause key
happens i.e For Auto
Page | 25
Hide quick links:
Advertisement
Table of Contents
