Cambridge Audio AXR85 User Manual page 9

SPEAKER B CONNECTIONS
The Speaker B connections on the back of the amplifier allow for
a second set of speakers to be used (i.e. speakers located in another room).
The Speaker A/B button on the front panel and remote control allows the two sets of
speakers to be toggled on and off. Refer to the Front Panel or Remote Control section
of this manual for more information on the Speaker A/B operation.
AXR
BI-WIRE CONNECTIONS
If your loudspeakers are equipped with two sets of terminals, then it is possible
to connect them in the bi-wire configuration. Bi-wiring sends the bass and treble
frequencies down separate speaker cables, resulting in a clearer, more focussed
sound.
Right
speaker
Speaker A
Main Room
Speaker B
Room Two
Black
Red
HF HF
LF LF
Black Red
Either A or B, or both A and B may be selected for use.
Note: When using two pairs of speakers, use speakers with a nominal
impedance of 16 ohms each.
Note:
– Speaker A and B must both be selected for this type of connection to
work.
– Remove the bi-wire link on the speaker terminals before connecting.
Refer to your speakers' manual for more information.
Red Black Black Red
HF
LF
AXR85
AXR100
Black Red
Left
speaker
HF
LF
Black Red