Connecting The Ac Power Cord; Connecting Interface Cables - Citizen CT-S4000 Quick Start Manual

3 Connecting the AC Power Cord

1. Turn off the printer power switch.
2. For AC power type (with built-in power supply), connect the AC power cord
to the AC inlet at the back of the printer and plug the AC power cord into the
wall outlet.
AC inlet
AC power cord

4 Connecting Interface Cables

Confirm that the power switch is OFF and connect the interface cable.
Orient the interface cable terminal correctly and insert it into the interface connector.
Serial Interface
CAUTION!
■ When disconnecting the cable, always hold the connector.
■ Be careful not to insert the USB interface cable into the cash drawer kick-out connector.
Cable connector
Parallel Interface
— 6 —
Power connector
Flat side
USB connector
USB Interface