Installing/Mounting; Basic Safety Instructions; Mounting - Siemens SIWAREX JB Operating Instructions Manual

Installing/mounting

5.1

Basic safety instructions

NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper

mounting.

• Before installing ensure there is no visible damage to the device.
• Make sure that process connectors are clean, and suitable gaskets and glands are
• Mount the device using suitable tools. Refer to the information in Technical data
5.2 Mounting
Introduction
You can mount the SIWAREX JB junction box in any position. Preferably, the cable glands
should point downward.
Procedure
1. Prepare the location for mounting.
2. Position the corresponding drill holes, see Dimension drawings (Page 37).
3. Screw the junction box tight with four screws.
SIWAREX JB
Operating Instructions, 12/2017, A5E43011851-AA
used.
(Page 33) for installation torque requirements.
5
21