Table of Contents
Advertisement
4-6
C
4: A
HAPTER
VLAN Configurations
Example 1
The example shown in
configuration comprising a single Switch 1005 with a 10Base-T
Transceiver Module. The ports are divided between two VLANs; VLAN 1
is able to talk to VLAN 2 using the backbone port connection between
each VLAN and the router.
To set up this configuration:
1 Use the VT100 screens to:
a Place ports 1-6 in VLAN 1.
b Place ports 7-12 in VLAN 2.
2 Connect a port in VLAN 1 to the router.
3 Use the VT100 screens to specify that the VLAN 1 port connected to
the router is a backbone port.
4 Repeat steps 2 and 3 for VLAN 2.
You can set up this configuration more easily using 3Com's Transcend
Enterprise Manager applications.
M
DVANCED
ANAGEMENT
Figure 4-2
illustrates a simple VLAN
DUA1840-0AAA01
Advertisement
Table of Contents
