Chain And Rear Tire Replacement; Right Side; Left Side - Razor E200 Troubleshooting Manual

Chain and Rear Tire Replacement
Toolsrequired: Phillipsscrewdriver,10mm wrench,two (2)8mmwrenchesand two (2) 16mm wrenches.
3/% ....
I _ _,_4_ / _ ._ _
'1 With a Phillipsscrewdriver,
loosenthe two screwsand
removethe chainguard.
2 With a lOmmwrench,
loosenthe brakecableanchor
and disconnect t he cable.
=:, _. !_<,t i_ _ ,_ L_._-_- _ , _, ,,;;;
i , - t F_ i7 " / .... " "
4. With two 16mmwrenches,
loosenthe axle.Slide thewheel
downand remove from chain
sprocket.Notethe sequence of
the hardware.
5 Installnew chainor wheel by
maneuvering the chainontothe
sprocketand slippingthe axle
intothe slots on the frame.
7 Installthe brakespringand
threadthe cablewire intothe
cableanchor. T hreadthe cable
to its originalpositionand
tighten securely.
J
13Tightenthe brakehousing
anchorsecurely. T estride and
check.Readjust a s needed.
3 With two 8mmwrenches,
loosenbrakehousinganchor
anddisconnect.Keepthe spacer
andbolts together.
, /
/'
/ /
//
Tohookupthe brakehousing
anchor, a lignthe cableguide
adjusterand install the spacer
andbolt. Donottighten until
final step.
Replace the chainguard.
Rearwheel hardwaresequence.
17-10,
\
\\\
17-6 _
17-5 17-8
RightSide (Throttle)
17-1- Spacer
17-2- Washer(thick)
17-3- Washer(thin)
17-4- Loci<nut
[eft Side (Brake)
17-5- Spacer
17-6- BrakePlate
17-7- Spacer
17-8- Washer(thick)
17-9- Washer(thin)
17-10- Locl<n ut
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at
www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00AM - 5:00PM Pacific Time.
6