Table of Contents
Advertisement
General Safety Information
The following general safety precautions must be observed during all phases
of operation, service and repair of this sensor. Failure to comply with these
precautions or specific warnings elsewhere in this manual violates safety
standards of design manufacture and intended use of the sensor. Agilent
Technologies assumes no liability for the customer's failure to comply with
these requirements.
The Instruction Documentation Symbol. The product is marked with this
symbol when it is necessary for the user to refer to the instructions in the
supplied documentation.
WARNING
BEFORE CONNECTING THE POWER SENSOR TO OTHER INSTRUMENTS ensure that all
instruments are connected to the protective (earth) ground. Any interruption of the
protective earth grounding will cause a potential shock hazard that could result in
personal injury.
Sound Emission
Herstellerbescheinigung
Diese Information steht im Zusammenhang mit den Anforderungen der
Maschinenlarminformationsverordnung vom 18 Januar 1991.
Manufacturers Declaration
This statement is provided to comply with the requirements of the German
Sound DIN 45635 T. 19 (Typprufung).
•
Sound Pressure LpA < 70 dB.
•
Am Arbeitsplatz.
•
Normaler Betrieb.
•
Nach DIN 45635 T. 19 (Typprufung).
•
Sound Pressure LpA < 70 dB.
•
At operator position.
•
Normal operation.
•
According to ISO 7779 (Type Test).
General Safety Information
v
Advertisement
Table of Contents
