Table of Contents
Advertisement
52
CUSTOMIZING SETTINGS
What Is Live Playback?
(This feature is only available in certain countries or models.)
This function allows you to temporarily save the programme you are currently watching to a USB HDD
device, so you can play back any scenes you might miss. You can also continue watching from where
you were previously, for example, if you go out for a while.
To use the Live Playback function, set Live Playback mode to On.
y
Temporary saving is done only in digital broadcasting mode. When in analogue broadcasting mode,
y
only the portions saved in digital broadcasting mode can be used.
With the Live Playback function, you can play a programme back for up to two hours. This time may
y
vary depending on your region. Recordings created on your region using the Live Playback feature
will be deleted.
Use the left or right navigation button on the remote control to rewind or fast forward the current video
y
by 10 seconds.
Connecting a USB HDD Device for Time Machine
1
Prepare a USB HDD storage device.
2
Connect the USB HDD device to the USB port on the side or back of the TV.
3
Set Live Playback mode to On.
The Time Machine
Ready
y
It is recommended that you use a USB HDD device with a capacity of between 40 GB and 2 TB.
y
To remove a USB HDD device, select Quick Menu → USB Device. Make sure you receive the confir-
y
mation message that the USB HDD device has been removed before disconnecting.
If a USB HDD device is faulty, the Time Machine
y
If you use a USB extension cable, the USB device may not be recognised or may not work properly.
y
feature requires a USB storage device which contains a hard disk drive (HDD).
Ready
function may not operate normally.
Ready
Advertisement
Table of Contents
