Table of Contents
Advertisement
42
CUSTOMIZING SETTINGS
To specify Factory Reset
SETTINGS> OPTION> Factory Reset
All stored information is deleted and TV settings are reset.
TV turns itself off and back on, and all settings are reset.
When Lock System is in place, a pop-up window appears and asks for password.
Do not turn off the power during initialization.
To change TV mode
SETTINGS> OPTION> Mode Setting
Selects Standard or Store Demo.
When in use in home, please select Standard.
Store Demo mode is for store display.
SETTINGS> OPTION> Customer Support> Software Update
Uses Software Update to check and obtain the latest version. If not updated, certain functions may not
work properly.
Software Update
Set it to On. If an update is available, a prompt will appear to perform the update.
Automatic update
[This feature is available on certain models only] If an update is available, the
mode
update automatically starts without prompting.
Check Update
[This feature is available on certain models only] Checks the latest update
Version
version installed. When a new update is available, the download process can be
performed manually.
When the update starts, the update progress window appears for a short time and disappears.
y
[Depending on model] The latest version can be obtained via the digital broadcast signal or an inter-
y
net connection.
Changing the programme while downloading the software via a digital broadcast signal interrupts the
y
download process. Returning to the initial programme allows downloading to resume.
If software is not updated, certain functions may not work properly.
y
[For Finland/Sweden/Denmark/Norway models.] If the software update is performed via the broad-
y
casting signal, you will be prompted to continue the update regardless of whether the Automatic
update mode is enabled or not.
[This feature is available in certain countries only.] It is also possible to check manually for available
y
updates.
SETTINGS > OPTION > Customer Support > Picture Test
[This feature is available on certain models only.]
Run an Picture Test first to verify that the image signal output is normal.
If there is no problem with the test image, check connected external devices and the broadcast signal.
SETTINGS > OPTION > Customer Support > Sound Test
[This feature is available on certain models only.]
Run a Sound Test first to verify that the sound signal output is normal.
If there is no problem with the test sound, check connected external devices and the broadcast signal.
Advertisement
Table of Contents
